MxP2188 MATRIMIX PAGING SYSTEM ( VER.2 )
Components in MatriMix System
Introduction
MxP2188 controller shall be able to work as a standalone controller, where signal routing, paging and volume controlling can be done at the front panel.
When there is such a requirement that flexibility of controls - remote paging, or remote controlling of source and volume or remote source patching, Amperes has the related components to cater for the needs.
PD1160 - 8 / 16 Zone Remote Paging Microphone ( Firmware Ver 2 )
A dedicated remote paging desk with 8 / 16 channel zone selection, connects directly to MxP2188 controller. Multipoint paging can be achieved by using EX1102 paging mic extender. For this updated version, no paging desks shall have priority over others, ie. busy indicator shall be shown and other inactive mic shall be disabled temporary.
For larger setup, we recommends PD2400 or PD2800 desktop paging microphones.
Technical Specifications
Power requirement |
24V DC via MxP2188 controller |
Power consumption |
400 mA max |
Communication |
RS485 ; 19.2 kbps |
Connections |
Via Cat5e cable not exceeding 100 m |
Controls |
Zone selection, All Call |
Indications |
Power, signal, data, zone, busy |
Microphone |
Condenser ; cardioid |
Output |
Balanced line output |
Dimensions ( WxHxD ) |
150 x 186 x 62 ( without mic ) |
Weight ( kg ) |
1.2 kg |
RP1104 - Remote Zone Control Panel ( Firmware Upgraded )
RP1104 is an improved version over RP1101 with sensor touch and LCD display. It shall be installed at remote location ( at remote zone ) and connects to the MxP2188 controller via Cat 5e cable.
This shall enable the remote location to select its preferred input source, its bass and treble level and the volume level.
Each panel shall run directly to each individual channel port
Technical Specifications
Power requirement |
24V DC via MxP2188 controller |
Power consumption |
100 mA |
Communication |
RS485 ; 19.2 kbps |
Connections |
Via Cat5e cable not exceeding 300 m |
Controls |
Volume, bass, treble, input source, address setting |
Indications |
Via LCD - Source, volume, unit address |
Dimensions ( WxHxD ) |
86 x 86 mm |
Weight ( kg ) |
100 g |
RP1105 - Remote Source Input Panel
RP1105 is used as local source patch panel and to be used alongside with RP1104. Input souce can be either mic or line level with approriate jack provided. Among sources are handheld dynamic microphones, wireless receiver, computer audio output and CD player.
Technical Specifications
Power requirement |
24V DC via MxP2188 controller |
Power consumption |
100 mA |
Communication |
RS485 ; 19.2 kbps |
Connections |
Via multiway cable to RP1104 |
Inputs |
Mic / Line ( unbalanced ) to Minijack |
Dimensions ( WxHxD ) |
86 x 86 mm |
Weight ( kg ) |
100 g way |
EX1102 - Paging Mic Extender ( Ver 2 )
EX1102 is used whenever multipoint paging ( several paging microphones ) shall be installed in a circuit.
MS1102 - Paging Mic Splitter
MS1102 is used whenever cascading of controllers is required. Returning circuit of paging microphone shall be connected to this unit and then split into two circuits, each to a controller. Use more than one MS1102 if larger cascading is required.
ER1108 - Matrix Overriding Panel
ER1108 is an 8 in / 8 out relay panel which would override all individual audio signal from Matrix controller and re-route the outputs to a single emergency source such as EP1200 emergency paging panel.
It is an optional item in a system and shall be installed after the Matrix controller with outputs connected to individual amplifier of output zone. It is normally used together with EP1200 in a matrix system setup.